*#06# for checking the IMEI (International Mobile Equipment Identity)

*#170602112302# shows the SW version.

Software

Latest software version on Nokia 1610: v 5.15 (25.02.97) NHE-5NX - older version V 4.19

Latest software version on Nokia 1611: V 4.03 NHE-5SX

*#06# показывает IMEI номер

 *#9999# показывает версию программирования телефона

*#170602112302#  или *#682371158412125#  аналогичный код для телефона Nokia 2110i

 *#3283# показывает дату производства аппарата

 Если телефон закодирован SP (service provider) кодом, который неизвестен, то попробуйте следующий вартант:

                    включите телефон;

                    при запросе SP кода нажмите 112 затем <send>;

                    теперь быстро нажимайте # send end send end

Эту операцию нужно повторять при каждом включении аппарата.

Раскладка выходов (клавиатура сверху):

ANT               1-16               Charge

( O ) I - I - I - I - I - I - I - I ( ) ( o )

( O ) - выход для автомобильной антенны

( о ) - выход для зарядки

1-16 системные выходы:

Digital ground
External audio input from accessories or handsfree microphone.
Multiplexed with junction box connection control signal
Analogue ground for accessories
Transmitted DBUS data to the accessories
Serial Bidirectional data between the phone and accessories
Hook indication. HP has a 100KE pull-up resistor
Handsfree device power on/off, data to flash programming device.
Battery charging voltage
Digital ground
External Audio output to accessories or handsfree speaker
DBUS data bit sync clock
DBUS recieved data from the accessories
Power supply to headset adapter
Programming voltage for FLASH
DBUS data clock
Battery charging voltage

*#06# показывает IMEI номер

*#7780# восстанавливает заводские параметры (за исключением памяти, языка, счётчика)

*#3110# показывает версию программирования телефона

*#746025625# остановка Sim-Clock (режим позволяющий экономить заряд батареи)

*#92702689# [*#war0anty#] вход в специальное меню, в котором можно использовать представленные ниже команды:

6232 (OK) : показывает месяц и год выпуска

7332 (OK) : показывает дату последнего изменения в программе

7832 (OK) : показывает дату продажи ( если введён)

9268 (OK) : показывает серийный номер

37832 (OK) : можно ввести дату продажи MMYY ( осторожно! Потом нельзя изменить)

87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another

(eg. if broken) with 6110 u can transfer all data via IRport. (Confirm Transfer?)

Nokia 3210

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# shows the SW version.

*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.

*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*#4720# - Half Rate Codec activation. It will automatically restart

*#4720* - Half Rate Codec deactivation. It will automatically restart

*#746025625# - Sim clock allowed status.

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk- time is reduced with about 5%

Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

*#92702689# - takes you to a secret menu with 6 choices

1) shows the serial nr.

2) shows when the cel phone was made mmyy

3) shows when the the cel. phone was purchased mmyy

4) shows how many times the cel. phone has been repaired.

5) makes u capebel of transferring user data if u have the gear for it

6) shows how many houres the phone has been on

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# for checking the phones software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped

(Sim-clock-stop is a kind of standby mode which will save battery time) This code doesn't work on SW version 4.59.

*#92702689# [*#war0anty#] Warranty code.

You don't need the warranty-codes any more - you can

just scroll through the information like in any other menu. It has the the

same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

Menu:

1: Displays Serial Number.

2: Displays the Month and Year of Manufacture (0997)

3: Displays (if there) the date where the phone was purchased (MMYY)

you can here set the Purchasing Date (Warning: You can only do this once -

so be careful what you write...)

4: Displays the date of the last repairment - if found (0000)

6: Transfers ALL phone numbers, pictures, sounds from one phone to another (eg. if broken) with 6110 u can transfer all data via IRport. (Transfer user data?)

Software UPDATED / NEW

Type : NSE-1

LASTEST Version 05.24 (xx-xx-99)

-An Updated GSM operator's List

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# for checking the phones software (SW) - called firmware revision information.

*#6110# Try this code if the above code doen't work.

On SW-Version 5.24 (only this version) you can check if the Sim-Clock can be Stopped

with this code. (Sim-clock-stop is a kind of standby mode which will save battery time)

*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped

(Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Warranty code.

You don't need the warranty-codes any more - you can

just scroll through the information like in any other menu. It has the the

same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

Menu:

1: Displays Serial Number.

2: Displays the Month and Year of Manufacture (0997)

3: Displays (if there) the date where the phone was purchased (MMYY)

you can here set the Purchasing Date (Warning: You can only do this once -

so be careful what you write...)

4: Displays the date of the last repairment - if found (0000)

6: Transfers ALL phone numbers, pictures, sounds from one phone to another

(eg. if broken) 6110 can also transfer all data via IRport (Confirm Transfer?)

Software

Type: NSE-3

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# shows the SW version.

*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.

*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*#4720# - Half Rate Codec activation. It will automatically restart

*#4720* - Half Rate Codec deactivation. It will automatically restart

*#746025625# - Sim clock allowed status.

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk- time is reduced with about 5%

Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

*#92702689# - takes you to a secret menu with 6 choices

1) shows the serial nr.

2) shows when the cel phone was made mmyy

3) shows when the the cel. phone was purchased mmyy

4) shows how many times the cel. phone has been repaired.

5) makes u capebel of transferring user data if u have the gear for it

6) shows how many houres the phone has been on

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#8110# for checking the phones software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped

(Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Phone asks 'warranty code:'

Press the following warranty code:

6232 (OK) : Displays the Month and Year of Manufacture (0997)

7332 (OK) : Displays the date of the last repairment - if found ('DATE NOT SAVED'...)

7832 (OK) : Displays (if found) the date where the phone was purchased ('DATE NOT SAVED'...)

9268 (OK) : Displays Serial Number

37832 (OK) : Set the Purchasing Date MMYY

(Warning: You can only do this once - So be careful what you write...)

87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another (eg. if broken) with 6110 u can transfer all data via IRport. (Confirm transfer?)

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# for checking the phones software (SW)

*#6110# Try this code if the above code doen't work.

*#92702689# [*#war0anty#] Warranty code.

You don't need the warranty-codes any more - you can

just scroll through the information like in any other menu. It has the the

same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

Menu:

1: Displays Serial Number.

2: Displays the Month and Year of Manufacture (0997)

3: Displays (if there) the date where the phone was purchased (MMYY)

you can here set the Purchasing Date (Warning: You can only do this once -

so be careful what you write...)

4: Displays the date of the last repairment - if found (0000)

6: Transfers ALL phone numbers, pictures, sounds from one phone to another

(eg. if broken) 6110 can also transfer all data via IRport (Confirm Transfer?)

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# shows the SW version.

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# shows the SW version.